Short Description:
旋转吊具是专门为桥式起重机、浮式起重机以及门座式起重机而配套设计的。适用于ISO标准20英尺、40英尺、45英尺集装箱装卸作业。
联系我们获取更多信息
我们能为您提供更多的选择方案
旋转吊具根据与主机的连接方式分为横梁连接，两滑轮连接、四滑轮连接等方式。用户可根据主机类型和实际需要，可配备相应的连接装置。
【型号/Model：QSHI】 | 控制电压 | AC 220V(可选 / as agreed) | |||||||||
Control voltage | |||||||||||
适用于操作 ISO标准 20’ ,40’ 集装箱 | 总功率 | ≤ 8KW | |||||||||
For operation with ISO standard 20’ and 40’ containers | Total power | ||||||||||
额定起重量 | 41T | 防护等级 | IP 55 | ||||||||
Rated lifting load | Precaution class | ||||||||||
允许载荷偏心 | ±10% | 系统工作压力 | 100 bar | ||||||||
Allowable load eccentricity | Operating pressure of the system | ||||||||||
四角吊耳负重 | 10t×4 | 环境温度 | -20℃ ~+45℃ | ||||||||
Load of lifting lugs at four corner | Ambient temperature | ||||||||||
自重 (吊具部分 ) | 【转销形式】 | ISO浮动转销，油缸驱 动 | |||||||||
14.5t | ISO floating twistlock, driven by an oil cylinder | ||||||||||
Self-weight (spreader) | Twistlock Mode | ||||||||||
伸缩 (20’ 到 40’ ) | ~ 30 S | 液压马达驱动链轮 /滚子链传动 | |||||||||
Expansion time (20’ to 40’ ) | 【伸缩驱动方式】 | The telescopic system is driven by means of a | |||||||||
转销 ( | 90°) | ~ 1 S | Telescopic Mode | hydraulic motor and reduction gearbox connected to | |||||||
Twistlock | rotation 90° | an endless chain. | |||||||||
导板 (180°) | 5~7S | 【导板装置】 | 可拆卸式导板 | ||||||||
Flipper through 180° | Flippers Device | knock-down flipper | |||||||||
调心 (±1200mm) | 【旋转驱动方式】 | 液压马达驱动 | |||||||||
Gravity point adjustment ( ± | ~25S | ||||||||||
Rotatory Mode | The rotatory motion are drived by h y d ra u lic motor. | ||||||||||
1200mm) | |||||||||||
旋转 (±220°) | 【适用】 | 岸桥，轨道吊 , 轮胎吊 | |||||||||
~35S | |||||||||||
Rotation(±220°) | Application | QC,RMG， RTG | |||||||||
电源电压 /频率 | AC 380V (3P)/50HZ | ||||||||||
Power voltage/ Frequency | (可选 / as agreed) | ||||||||||